Semi-Frameless Shower Screens Gold Coast

We design, custom-make and install semi-frameless shower screens on the Gold Coast, built in 6mm toughened glass with a frameless pivot door and a slimline aluminium frame. We measure every opening on site and fit each semi-frameless pivot shower screen with our own team, with service across the Gold Coast, Tweed Heads and Brisbane.

No obligation  ·  Same-day fixed quote  ·  Free on-site measure

Request a Free Quote
Contact Form (#3)
Servicing Gold Coast Brisbane Tweed Heads Nerang Showroom
50-years experience
50+ Years of Family Glass Experienc

One of the most experienced teams in QLD, with decades of hands-on knowledge

Custom Made
Custom-Made to Your Opening

No standard sizes forced to fit. Each screen is made to your measured space.

Free On-Site Measure
Free On-Site Measure

We measure at your property so the screen suits your real walls and floor.

gold coast shower screen installers
Installed by Our Own Team

Your screen is fitted by REGAL installers, never subcontractors.

Corner Angle Semi Frameless Shower Screens in Gold Coast home
The Middle Option

What a Semi-Frameless Shower Screen Is

A semi-frameless shower screen has a frameless pivot door paired with a slimline aluminium frame around the fixed panels or the screen perimeter. The door itself carries no surrounding frame, while the fixed glass is held in a low-profile frame for support. Our semi-frameless screens use 6mm toughened glass and are custom-made to the measured opening.

This style sits between framed and frameless options in both look and budget. You get a cleaner, more open finish than a fully framed screen, without the higher cost of a fully frameless screen. Many homeowners choose semi-frameless showers for exactly that balance of appearance, function and value. Some people search for this as a semi-framed shower screen. The product is the same; the more accurate term is semi-frameless, because the pivot door is frameless and only the perimeter or fixed panels carry a frame.

If you are still deciding on a screen type, you can compare the full range of shower screens on the Gold Coast before settling on semi-frameless.

Engineered to Last

How Our Semi-Frameless Pivot Door Works

The pivot door is the heart of a semi-frameless screen, so we build ours to open smoothly and hold up to daily use. Each door turns on a patented captive stainless-steel pivot pin, which keeps the door aligned and supports whisper-quiet operation every time you open it. Stainless steel also resists the moisture and humidity of a Queensland bathroom.

Where suitable, the door can be set to swing in or out, so the opening suits the bathroom layout rather than working against it. We confirm the swing direction with you during the on-site measure.

Few bathroom walls are perfectly square. Because our semi-frameless screens are custom-made, the glass is cut to suit the opening. We do not rely on excess silicone inside the frame to make the screen look square or level.

Built Into Every Door

Patented captive stainless-steel pivot pin

The pivot pin is what keeps the door aligned and quiet over years of daily use.

  • Whisper-quiet operation every time you open it
  • Stainless steel resists Queensland moisture and humidity
  • Swing in or out, hinged left or right where suitable

No shower screen is a sealed tank, as these are not required by law. They are a fantastic addition to your bathroom or ensuite and help control the excess water during showers.

Made to Fit Your Space

Configurations to Suit Your Bathroom

We custom-build every semi-frameless shower screen to the opening we measure, so the screen suits your recess rather than forcing your bathroom to fit a standard panel. We work out the right configuration with you at the on-site measure.

Front Only
Front Only
A front panel with a pivot door, designed for an alcove shower with three tiled walls.
Front & Return
Front & Return
A front panel with a return panel where you have 2 tiled walls.
Front & Return Hob
Front & Return Hob
The front-and-return layout built to sit on a tiled hob, for showers with a raised kerb at the base.
Corner Angled
Corner Angled
Two panels meeting at an angle for corner or diamond-set showers, following the shape of the recess.
Partition Screen
Partition Screen
A fixed partition panel, for open or walk-in showers where a swinging door is not needed.
Bottomless-Track Pivot
Bottomless-Track Pivot
A pivot version without a bottom track, suited to wheelchair access, mobility needs or easier step-in entry.

The right setup depends on your layout, seals, screen position and floor fall, so we confirm the configuration and how it handles water at the on-site measure. If your bathroom is tight or you prefer a sliding door instead, see our semi-frameless sliding shower screens.

Match Your Bathroom

Glass and Frame Options

REGAL’s semi-frameless screens are made from 6mm toughened glass, available in Clear, Opti, Fluted, Frosted and Tinted to suit the privacy and style you want. Glass is cut, processed and toughened at the Brisbane glass plant, then the screen is custom-built at our Nerang factory. An optional water-repellent coating is also available to help your glass shed water and stay clearer between cleans. To compare the finishes side by side, see our full range of shower screen glass options.

Clear
Open view
Opti
Low-iron
Fluted / Reed
Textured
Frosted / Acid-Etch
Privacy
Tinted
Softer light
7 Frame Colours and Finishes

The slimline frame on a semi-frameless screen is a finishing detail, so we make it easy to match to your tapware, fittings and bathroom palette. We offer 7 frame colours: Bright Gold, Satin Gold, Bright Silver, Matt Silver, Nickel, Black and White.

Black is the standout choice for contemporary Gold Coast bathrooms. A black semi-frameless shower screen suits black tapware and dark feature tiles, while Bright Silver, White and Matt Silver suit lighter, classic and coastal bathrooms. Other newer options are Gun Metal, Nickel & Bright Satin Gold.

If you have chrome tapware, Bright Silver and Nickel give you the same bright, polished look, and both wear well in a humid bathroom. We bring the colour options to the on-site measure so you can match the finish to your space before you commit.

Quality That Holds Up

Why Choose REGAL for Semi-Frameless Shower Screens

A semi-frameless screen looks simple, but the difference between a quality screen and a budget one is in the glass, hardware and build. We control all three, so the screen we fit in your bathroom is made to last, not just made to fit.

Custom-Made to Your Opening

We make every screen to the exact opening we measure on site. The glass is then cut to suit and wall or floor runouts, so there is no filling with silicone in the framing to make the glass/screen appear square. We don’t use any standard imported glass.

Built on Quality Hardware

Our semi-frameless pivot screens use 6mm toughened glass, a patented captive stainless-steel pivot pin and magnetic seal options. These are the details that keep the door aligned, quiet and contained over years of daily use.

A Supply Chain We Control End to End

Glass is cut, processed and toughened at the Brisbane glass plant, then the screen is custom-built at our Nerang factory. Nothing is outsourced to a third party we cannot stand behind.

Australian-Made Aluminium Frame

The slimline frame is made from Australian aluminium in Melbourne, giving you a stronger, better-finished frame than many imported alternatives. We also hand-mitre our corners, rather than using standard square cuts and plastic corner connectors.

Built to Australian Standards

Safety, Standards and Installation

A shower screen is safety glass in a wet, high-traffic part of the home, so compliance is not optional and we do not treat it that way. Every semi-frameless screen we supply and install meets the relevant Australian Standards, and our own licensed team handles the fit.

Toughened Safety Glass

We use 6mm toughened safety glass that meets AS2208. Toughened glass is heat-treated to be far stronger than ordinary glass, and if it breaks, it crumbles into small blunt pieces rather than sharp shards.

Compliant Design and Installation

Our screens are designed and installed to AS1288, the standard that covers how glass is selected and fitted in buildings. That means the right glass in the right place, fixed the right way for a bathroom.

Licensed and Accountable

REGAL holds QBCC licence 15201724, so the work is carried out under a licensed builder. For new builds and renovations, we can provide Form 15 and Form 43 compliance certificates where they are required.

Installed by Our Own Team

Your screen is measured and fitted by REGAL installers, not subcontractors. The same team that quotes the job is accountable for the finished result.

Compliance
AS2208 AS1288 QBCC 15201724 Form 15 Form 43
Gold Coast Semi-Frameless Shower Screens
Local and Close By

Semi-Frameless Shower Screens Gold Coast Wide

We supply and install semi-frameless shower screens right across the Gold Coast, from the northern suburbs down to Coolangatta, along with Tweed Heads and Brisbane. Our factory is in Nerang, so we are local to the area we serve and never far from your job.

Your screen is custom-built at our Nerang factory, using glass cut, processed and toughened at the Brisbane glass plant. Because we make and install across the region ourselves, the team that measures your bathroom is accountable for the screen that is built and fitted.

Our Process

How We Measure, Quote and Install

We manage your semi-frameless screen from the first measure through to installation, so nothing falls between trades.

1
Book Your Free Measure
Get in touch and we will arrange a time to come to your home at no cost.
3
Free On-Site Measure & Same-Day Fixed Quote
We measure the opening, talk through your glass, frame and configuration options, and give you a fixed quote on the day.
4
Custom Manufacturing
Glass is cut, processed and toughened at the Brisbane glass plant, then your screen is built at our Nerang factory.
5
Professional Installation
Our own team fits your screen, checks the door and seals, and leaves the bathroom clean and ready to use.

Ready for a fixed quote?

No obligation. We’ll have a fixed price ready the same day we measure.

FAQs

Semi-Frameless Shower Screen FAQs

A semi-frameless shower screen starts from around $1,050 supplied and installed for a 900 x 900mm clear glass pivot door screen. The final cost depends on the size, glass type, frame colour and configuration. Larger screens, low-iron glass and corner or wall-to-wall layouts cost more. Because every screen is custom-made, your price is confirmed at the free on-site measure and same-day fixed quote.

A semi-frameless shower screen has a frameless pivot door with a slimline frame around the fixed panels, while a frameless screen has no surrounding frame at all. Semi-frameless uses 6mm toughened glass and costs less, while frameless uses thicker 10mm glass for an open, glass-only look at a higher price. Most homeowners choose semi-frameless for the balance of appearance and value.

Yes. REGAL can supply a semi-frameless pivot version without a bottom track for wheelchair access, mobility needs or easier step-in entry. Suitability depends on the layout, floor fall and water containment, so we confirm it during the on-site measure before recommending this option.

Semi-frameless shower screens are easy to clean because the frameless pivot door has no surrounding frame to trap grime, leaving only the slimline frame on the fixed panels to wipe down. A quick wipe after showering keeps the glass clear, and an optional water-repellent coating helps the glass shed water between cleans.

A well-fitted semi-frameless shower screen should contain normal shower spray well, but no shower screen is fully sealed like a tank. Water containment depends on the layout, magnetic seals, screen position and floor fall. We assess all of this at the on-site measure and fit the right seals so spray stays inside the recess.

Semi-frameless shower screens use 6mm toughened safety glass that meets Australian Standard AS2208. Toughened glass is heat-treated to be much stronger than ordinary glass, and if it breaks it crumbles into small blunt pieces rather than sharp shards. You can choose Clear, Opti low-iron, Satinlite, Frosted or Tinted glass to suit your privacy and style.

REGAL semi-frameless shower screens come with a 2-year warranty, with 12 months of cover on moving parts such as the pivot mechanism and seals. The screens are made from 6mm toughened glass and built to Australian Standards, then installed by our own licensed team, so the work is covered from build to fit.

Ready When You Are

Get Your Semi-Frameless Shower Screen Quote

Book a free on-site measure and we will bring the glass and frame options to you, measure your bathroom, and give you a same-day fixed quote. Your semi-frameless screen is then custom-built and installed by our own team, with service across the Gold Coast, Tweed Heads and Brisbane.

Free Measure. Same-Day Quote. Installed by Our Own Team.

07 5596 3135

sEMI-Frameless Shower Screen Guides

Tips & Buying Advice