Glass Shower Panels Gold Coast

REGAL makes custom glass shower panels on the Gold Coast for walk-in and open showers: a fixed pane of 10mm toughened glass with no door. We measure, build and install across the Gold Coast, Tweed Heads and Brisbane, with a free on-site measure, same-day fixed quote and installation by our own team.

No obligation  ·  Same-day fixed quote  ·  Free on-site measure

Request a Free Quote
Contact Form (#3)
Servicing Gold Coast Brisbane Tweed Heads Nerang Showroom
Custom Made
Custom-Made to Measure

Built for the actual bathroom we measure, not a standard size forced to fit.

Toughened Safety Glass
10mm Toughened Safety Glass

Made for fixed shower panels and compliant with Australian glass standards.

Free On-Site Measure
Free On-Site Measure

We check layout, floor fall and water containment before quoting.

gold coast shower screen installers
Installed by Our Own Team

No subcontractors. REGAL measures, builds and installs your panel.

Glass Shower Panels Gold Coast
The Basics

What Is a Glass Shower Panel?

A glass shower panel is a single fixed pane of glass with no door. It works as a partition that defines the shower area while leaving an open walk-in entry, rather than sealing the space like a fully enclosed screen. Our glass shower panels use 10mm toughened safety glass and are made to measure for the bathroom.

A fixed panel is a popular choice for walk-in and open showers because it keeps the bathroom feeling open and lets natural light move through the space. There is no door to pull open and no track underfoot, so the shower is easy to step into and simple to keep clean. If you are looking for a fixed panel shower screen rather than a hinged or sliding door, this is the product most people mean.

Glass shower panels suit modern wet-room layouts, larger showers and open bathrooms where the glass needs to define the shower without enclosing it. If your bathroom needs a hinged or sliding door instead, you can compare our full range of shower screens on the Gold Coast.

Layouts

Custom-Made Glass Shower Panels That Fit Your Bathroom

We make every glass shower panel to suit the opening we measure, so the glass is cut to size for your bathroom rather than forced from a standard panel. That means custom heights, panels up to 2,500mm wide without bracing, and allowances for out-of-square walls, angled ceilings and unusual bathroom layouts. The fixing method depends on the wall, the layout and the finish you want.

Glass Clips

Glass clips give a minimal, low-profile fixing style that keeps the glass looking open.

Shelf Brackets

Shelf brackets are a sturdy option where the layout suits a bracket fixing.

Wall Channel

A wall channel works well where a wall is uneven or where you want a cleaner edge along the join.

A fixed panel is built to contain normal shower spray, not to seal the shower as a fully enclosed screen does. How well it keeps water in depends on the panel length, showerhead position, floor fall and opening layout. We check all of this on site before we recommend a size and fixing method.

Radius Corner Glass Panels

A radius corner is a contemporary option for our glass shower panels: a curved top corner with a 250mm to 300mm radius instead of a square edge. Radius glass panels suit walk-in and open showers, where the curved corner softens the panel and works with a more open bathroom. We shape the radius during fabrication.

Glass & Finishes

Glass and Finish Options

10mm toughened glass in the look that suits your bathroom, with brackets and clips to match your tapware.

We make every frameless glass shower panel from 10mm toughened safety glass, with glass types to suit different bathrooms. Clear glass keeps the space bright and open. For open showers, acid-etch frosted, reed and fluted glass add privacy while still letting light through. Opti low-iron glass gives truer colour for printed or feature panels, while tinted glass adds depth.

Clear
Open view
Opti
Low-iron
Fluted / Reed
Textured
Frosted / Acid-Etch
Privacy
Tinted
Softer light

For deeper glass choices, see our shower screen glass options. If you want the panel to become a feature, ask us about a printed glass panel option. We also offer an optional water-repellent nano coating. It helps the glass shed water, which can reduce water marks and make regular cleaning easier.

Frameless Shower Screen Hardware Finishes

We supply fixing hardware in 11 bracket finishes, so the brackets and clips can match your tapware and fittings. Popular finishes include matt black, gunmetal, brushed gold, rose gold, brushed nickel, polished nickel, white and pearl chrome.

Why REGAL

Why Choose REGAL for Glass Shower Panels

We control the whole job from measure to install, so the panel that goes on your wall is made for your bathroom and fitted by the people who measured it.

Made for Your Measured Bathroom

Every panel is built to the space we measure, including wall alignment, layout and fixing method.

Glass Processed to Standard

Each panel uses 10mm toughened safety glass, cut, processed and toughened at the Brisbane glass plant.

Custom-Built at Nerang

Once the measurements are confirmed, the panel is custom-built at our Nerang factory.

Installed by REGAL

Our own team installs the panel, with no subcontractors and a same-day fixed quote before anything is made.

Compliance & Safety

Safe, Compliant Installation

Our glass shower panels use 10mm toughened safety glass and are manufactured to comply with the Australian safety glazing standards, AS2208 and AS1288. We hold QBCC licence 15201724, and we can supply Form 15 and Form 43 for new builds and council-approved renovation work where required.

We supply and install every glass panel with our own team, so it is fitted correctly and to standard. We do not offer glass shower panels as a DIY product.

Glass standard
AS1288
Safety glass
AS/NZS 2208
QBCC licence
15201724
Glass
10mm Toughened
New builds
Form 15
Renovations
Form 43
Our Process

How We Measure, Quote and Install Your Glass Shower Panel

1
Free On-Site Measure

We come to you and measure the bathroom, checking the layout, floor fall, wall alignment and how well a fixed panel will contain water in your shower.

2
Same-Day Fixed Quote

We give you a fixed quote on the same visit, based on the measured space and the glass, fixing and finish options you choose.

3
Custom Manufacture in Nerang

The glass is cut, processed and toughened at the Brisbane glass plant, then your panel is custom-built at our Nerang factory.

4
Installed by Our Own Team

Our own installers fit the panel, with no subcontractors, so it is finished correctly and to standard.

Free on-site measure. Same-day quote. Installed by our team.

FAQs

Glass Shower Panel FAQs

A glass shower panel is a fixed pane of toughened glass with no door. It is commonly used for walk-in and open showers, where the glass defines the shower area while keeping the entry open. REGAL makes glass shower panels to measure using 10mm toughened safety glass.

Glass shower panels are one of the most common choices for walk-in showers, where a single fixed pane defines the shower without a door. Whether a panel suits your bathroom depends on the layout, showerhead position, floor fall and how much open space you have. We confirm all of this during the free on-site measure before recommending a panel size.

A glass shower panel is designed to contain normal shower spray, not to seal the shower the way a fully enclosed screen does. How well it holds water in depends on the panel length, showerhead position, floor fall and opening layout. We check these on site so the panel and shower work together to keep water where it should be.

Every REGAL glass shower panel uses 10mm toughened safety glass. The thickness suits a fixed frameless panel, giving it the strength and stability to stand on its own with minimal fixings. The glass is cut, processed and toughened at the Brisbane glass plant and complies with the Australian safety glazing standards, AS2208 and AS1288.

Yes, a glass shower panel can usually be fitted on out-of-square or uneven walls. Because every panel is custom-made to the space we measure, we can use glass clips, shelf brackets or a wall channel depending on the wall. A wall channel can help create a cleaner edge where the wall is not perfectly straight.

A glass shower panel starts from around $1,100 for a 900mm panel in clear toughened glass, or about $1,700 in fluted glass. The final price depends on the panel size, glass type, fixing method, bracket finish and the condition of the walls. Because every panel is custom-made, we confirm the exact cost with a free on-site measure and same-day fixed quote, so you know the full price before anything is made.

Yes, we measure and install glass shower panels right across the Gold Coast, as well as Tweed Heads and Brisbane. Every panel is custom-built at our Nerang factory and fitted by our own installation team, with no subcontractors. The free on-site measure confirms the panel that suits your bathroom before you commit.

Yes, we make radius glass panels with a curved top corner, usually a 250mm to 300mm radius. A radius corner is a popular option for walk-in and open showers because it softens the panel and suits a more open bathroom. We confirm the radius and panel size during the free on-site measure.

Free Measure

Get a Fixed Quote for Glass Shower Panels on the Gold Coast

Planning a walk-in or open shower? We custom-make glass shower panels to suit your bathroom, then install them with our own team across the Gold Coast, Tweed Heads and Brisbane. Book a free on-site measure and we’ll give you a same-day fixed quote.

Free Measure. Same-Day Quote. Installed by Our Own Team.

07 5596 3135

Shower Screen Guides

Tips & Buying Advice