What to Expect from Your Glass Splashback Installation

Please note: The images displayed in this blog post are for illustrative purposes only and do not reflect the REGAL Shower Screens range. Please visit the Product pages of our website for a true representation of our products.

When it comes to kitchen upgrades, few features make as much visual impact—or require more precision—than a glass splashback installation. Sleek, seamless, and easy to clean, glass splashbacks have become a go-to for modern kitchens, bathrooms, and laundries right across Australia.

However, fitting them isn’t a DIY job. Installing a glass splashback on the Gold Coast requires careful measuring, professional handling, and an expert eye — and that precision is exactly what sets made-to-measure splashbacks apart from off-the-shelf alternatives. REGAL is the trusted glass splashback installers Brisbane and Gold Coast homeowners turn to for high-end results without the stress.

In this article, I’ll walk you through what to expect before, during, and after the install, plus a few insider tips on preparation, timelines, and why homeowners and trades alike rely on us over other companies. Whether you’re renovating or refreshing, here’s what to know before the glass goes on the wall.

Before Installation: What to Know and Prepare

A successful splashback installation starts well before the glass even leaves the factory. At REGAL, we take the time to get things right from the start—because precision at the prep stage means a better fit, a cleaner finish, and no surprises on the day of install.

Key things we check before we even measure

Before we begin any templating or cutting, we do a full on-site check. This includes inspecting wall flatness, confirming cabinetry alignment, and noting the position of your power points and appliances. We also assess access to the area—tight corners or stairwells can change how we handle and carry the glass safely.

We don’t just show up with a panel and hope for the best. We book a check measure first to ensure every cut is exact and the panel will sit flush once installed. This step is essential to getting a clean, streamlined result—especially around power points, rangehoods, and benchtops.

And yes, installing glass splashback over tiles is something we do all the time—but only if the existing surface is sound, flat, and well-adhered. If the tiles are loose, cracked, or uneven, we’ll discuss your options with you before proceeding.

TL;DR: Proper prep makes all the difference. REGAL ensures walls are flat, power points are mapped, and your surface is fit for purpose—so when it comes time to install your glass splashback, everything fits perfectly the first time.

Our Process: What REGAL’s Glass Splashback Installation Involves

When you book a glass splashback installation with REGAL, you’re not just getting a piece of glass—you’re getting a full, start-to-finish service that’s built around precision and professionalism. We’ve installed thousands of splashbacks across Brisbane and the Gold Coast, and our process is fine-tuned to deliver a perfect result every time.

From measure to install—how it works

Here’s exactly what to expect when you work with REGAL as your splashback installer:

• Free quote or showroom consultation: Whether you’ve got your colours sorted or need help deciding, we can guide you through options, pricing, and what works best with your kitchen or bathroom layout.
• On-site check measure: We don’t cut until we measure. One of our expert installers will visit your home to take precise measurements, mark out power points, and assess wall conditions to ensure the panel fits flush and level.
• Custom manufacturing: Once measured, we cut your glass to size, polish the edges, prep the cutouts for power points or rangehoods, and back-paint the panel to your chosen colour. Every panel is custom-made—no stock sizes, no generic templates.
• Professional installation: When the glass is ready (typically within 5–10 business days), we return to install it. Most installs take around 1 to 2 hours on-site. We seal the splashback with neutral-cure silicone and thoroughly clean up before we leave.

We’ve seen too many homeowners try installing a glass splashback themselves using off-the-shelf panels or online suppliers, and the results often end in cracked corners, poor alignment, or awkward cutouts. This isn’t a job you want to do twice. Our team gets it right the first time, because this is all we do.

TL;DR: REGAL’s splashback process is simple, fast, and proven. From precise measurements to trade-quality fitting, we take the stress out of installing a glass splashback—no gaps, no cracking, and no DIY mistakes.

What Makes REGAL Different From Other Splashback Installers

Not all splashback fitters use the same business model. Some outsource the job. Some treat it as an afterthought. At REGAL, we do things differently—because we know that a flawless finish depends on precision, communication, and the right hands on the tools from start to finish.

Real trades, real fitters, real results

We’re not just a supplier—we’re your installer too. Every glass splashback we supply and install is handled by one of REGAL’s in-house experts. That matters. We don’t subcontract or hand the job over to a general handyman. Our team specialises in glass, and it shows in the details: clean silicone lines, perfect cutouts, and zero mess left behind.

Builders we work with—like Activates Construction—routinely mention how reliable our team is. They know we show up when we say we will, get the job done cleanly, and don’t need chasing. Homeowners say the same. Whether you’re working on a renovation in Burleigh or a new kitchen in Ashgrove, we’re the splashback installers Gold Coast and Brisbane builders keep turning to, build after build.

It’s also worth noting: we’re one of the few companies in the region that specialises solely in glass products. That means we understand the material, how it behaves, and how to fit it safely and correctly the first time.

TL;DR: REGAL’s in-house team isn’t made up of general trades—we’re dedicated glass specialists. That means your splashback is measured, handled, and installed by people who know exactly what they’re doing, from Brisbane to the Gold Coast.

Common Questions About Glass Splashback Installation

Conclusion

A glass splashback installation isn’t something you want to gamble on—it’s a precision job that demands experience. At REGAL Shower Screen, we take care of the entire process in-house, from check measure to clean-up, with nothing outsourced or left to chance. Whether you’re installing a coloured glass feature behind your cooktop or fitting a mirrored panel in a laundry, our team gets it right the first time.

Our experienced glass splashback fitters work across the region, delivering sharp lines, flush fits, and fast, clean installs every time. If you’re after a professional result with no surprises, trust the splashback installers Brisbane and Gold Coast homeowners and builders rely on.

No mess. No stress. Just a flawless finish.

Contact us today to arrange your free measure and quote.